Bluetooth Windows 11 Add Device Headphones/Speaker

 To hear sound from a wireless Bluetooth device such as a Speaker or Headset from your Windows 11 laptop, go to "Settings" and next click on "Bluetooth and Devices". Make sure Bluetooth is enabled (turned ON). Make sure your Bluetooth device is in Pairing Mode. Usually pressing/holding a button on the device will enter the device into Pairing Mode. Check owner's manual. 


 

 

 

 

 

 

 

Next click on "Add device"

 








click on "Bluetooth"


 

 

 

 

 

 

 

A Search will begin to find available Bluetooth devices nearby. When your device appears in the list, click on "CONNECT".


 

 

 

 

 

 

The next time you want to connect this Bluetooth device, all you do is put your device into Pairing Mode and go into "Settings" and "Bluetooth and Devices". Next click on the device to connect as the previous connection will be remembered. Sound will be sent wirelessly to the Bluetooth device and not the computer speakers. Bluetooth Headphones give you private listening. 

Comments

Post a Comment

Popular posts from this blog

Image
 How to connect speakers to PC / Laptop?  Connect Speakers to PC or Laptop Modern laptops with USB type C ports can connect directly to speakers which have a USB type C connection port such as the Creative Pebble. Laptops with only a headphone output can connect directly to speakers with a 3.5mm audio cable. For more robust sound, use an adapter cable with 3.5mm to RCA (white and red) to connect to a stereo receiver or audio video receiver analog audio inputs. Connect larger passive speakers to the speaker terminals on the receiver. Select the correct source on the receiver.  
Read more
Image
If your cable TV provider still offers analog channels, you can record one channel while watching/recording another. With only one cable box, you can descramble and tune in only one digital channel at a time to record or view. As long as you view or record a digital channel and view or record an analog channel, you can do both at the same time, but you cannot do two digital channels at the same time. For this, you would need two descrambler cable boxes. With this in mind, see the diagram above. Basically you use a signal splitter to connect the first VCR and the cable box from the wall. The first VCR's output goes into an A/B switch and then to the TV which is set to channel 3. The cable box output goes into the second VCR. Then the second VCR's output connects to the A/B switch and on to the TV. You can record or watch digital channels and record/view analog channels using the A or B position of the switch. The first VCR has to have a cable ready tuner, which most do, to pick ...
Read more